Dacor PHW Handbuch



Cleaning and Maintenance

Maintenance

to prevent electric shock turn off the main power 

switch before replacing the light bulb.
to avoid personal injury, make sure the cooktop 

or range, the hood and the light are cool before 

changing the light bulb.

•

•

Light bulb replacement is considered to be a homeowner 

maintenance operation. If the light does not work, before 

replacing it, check to make sure that the main circuit 

breaker (or fuse) and the main power switch on the hood 

are on.
Replace the light bulb only with Dacor Part no. 101945, 

available from any authorized Dacor parts dealer.

turn off the main power switch, located next to the 

light.
Reach up into the hood and pry the edge of the lens 

loose with a flat blade screwdriver, or disposable plas-

tic knife.  If using a flat blade screwdriver, cover the 

end with tape to avoid damage to the metal surfaces.

1.

2.

Once the light bulb is loose, pull down on it with a 

gentle rocking motion until it pulls free.

3.

Line up the prongs on the new light with the holes 

in the light socket. If there are more than two holes, 

insert the prongs into the center two holes. You may 

need a flashlight to see inside the opening.

4.

gently push up on the new light until it stops.
turn on the main power switch. touch the light key to 

make sure it is working.

101945

Light bulb

101951

filter (two per unit)

5.
6.