BlueStar BWO24AG Installationsanweisungen

                     P/N 750323 Page   13 

 

All specifications are subject to change without prior notification.

 

 

1.  Check the package for damage.  If any 

damage is visible you should mark the 
bill of lading you sign that there may 
be concealed damage. 

2. Ensure the container is upright.  If the 

container is not upright major damage 
can occur to your appliance.  Thor-
oughly inspect your appliance for 
damage.  If damage is discovered, do 
not refuse delivery.  Contact the dealer 
and file appropriate freight claims.  
Save all packaging material.  Do not 
contact the manufacturer.  Your appli-
ance was shipped from the dealer you 
purchased it from.  Shipping damage 
claims are to be resolved between the 
customer, shipping carrier and dealer.  
The manufacturer may assist in resolv-
ing any such claims, but such assis-
tance does not relieve you of your re-
sponsibility. 

3.  Move the container as close to its in-

stallation location as possible.  This 
will reduce moving and handling your 
appliance once it is out of its shipping 
container. 

4.  Cut the straps holding the carton to the 

palette.  Lift the box directly up and 
off the appliance.  Do not use a ham-
mer.  Do not cut the carton with a ra-
zor, utility or box cutting knife. 

5.  Remove and unpack any accessories 

shipped with your appliance.  Make 
sure no hardware or accessories are 
left to be disposed of unintentionally. 

 

CAUTION! 

 



Each gas appliance shall be located 
with respect to building construction 
and other equipment to permit access 
to the appliance.  Such access and 
clearance is necessary for cleaning and 
servicing. 



Due to its size and weight, a rolling lift 
jack, air sled or pallet jack should be 
used to move the appliance into posi-
tion. 



Do not push against the edges or sides 
of any appliance in an attempt to slide 
it into position.  Although all metal 
parts are deburred during the manufac-
turing process, serious injury could 
occur if the appliance were to move 
suddenly while being positioned.  We 
recommend you use gloves during the 
installation process. 



Do not use the louvered kick panel or 
oven door handle to push or pull the 
appliance into position. 



For optimum performance the appli-
ance should be leveled during installa-
tion.  A carpenter type level should be 
placed on the unit three ways:  side to 
side; front to back; diagonally.