Whirlpool WEG730H0DB Installationsanleitung

1. Insert both hanger arms into the door. Be sure that the hinge 

notches are engaged in the oven door frame.

2. Open the oven door.

The door should be able to open all the way.

3. Move the hinge levers back to the locked position. Check 

that the door is free to open and close and is level while 
closed. If it is not, repeat the removal and installation 
procedures.

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Check that you have all of the range accessories, especially 

oven racks. These accessories may be in the range 
packaging.

4. Dispose of/recycle all packaging materials.

5. Check that the range is level. See the “Level Range” section.

6. Use a mild solution of liquid household cleaner and warm 

water to remove waxy residue caused by shipping material. 
Dry thoroughly with a soft cloth. For more information, see 
the “Range Care” section of the User Guide.

7. Read the User Guide.

8. Turn on surface burners and oven. See the User Guide for 

specific instructions on range operation.

NOTE: Odors and smoke are normal when the oven is used 
the first few times.

■

Household fuse is intact and tight, or circuit breaker has not 
tripped.

■

Gas pressure regulator shutoff valve is in the open position.

■

Range is plugged into a grounded 3 prong outlet.

■

Electrical supply is connected.

9. When the range has been on for 5 minutes, check for heat. If 

the range is cold, turn off the range and check that the gas 
supply line shutoff valve is open.

■

If the gas supply line shutoff valve is closed, open it, and 
then repeat the 5-minute test as outlined above.

■

If the gas supply line shutoff valve is open, close it, and 
contact a qualified technician.

Please reference the “Warranty” section of the User Guide to 
contact service.

A