Gaggenau VL414111 Gebrauchsanleitung

Note:  You can use a special grease solvent for 
stubborn dirt. It can be ordered via the Online Shop.

▯

Soak the metal mesh grease filters in a hot soapy 
solution. 

▯

Clean the filters with a brush and then rinse them 
thoroughly.

▯

Leave the metal mesh grease filters to drain.

Bring the locking mechanism to the mid-position 
and pull it upwards and out. The locking 
mechanism snaps out of the holder.

‒ Use a tea towel to remove the locking 

mechanism.

‒ Risk of scratching when lifting out and setting 

down. Lift the locking mechanism straight 
upwards and do not tilt it.

Twist both retaining brackets upwards. Press the 
retaining brackets together slightly and 
downwards so that the metal grease filter loosens 
from the detent. Pull the metal grease filter 
upwards and out of the appliance.

Clean the metal grease filter.

Clean the inside of the downdraft ventilation.

Press the metal grease filter downwards until it 
snaps into the lateral detents.

Twist both retaining brackets downwards.

Press the locking mechanism downwards in the 
mid-position until it snaps into the two lateral 
detents with an audible "click".

Note:  The " symbol on the locking mechanism 
must be at the front.