Gaggenau DF251761 Benutzeranleitung

Seite von 96
34
en-us    Care and Maintenance
Drain pump
Large food remnants in the rinsing water not retained by 
the filters may block the waste water pump. In this case:
9
WARNING
Use caution when removing parts for cleaning as 
some debris may be sharp.
1.
Disconnect the appliance from the power supply.
2.
Take out upper rack 12 and lower rack 1j.
3.
Remove the filters 1Z.
4.
Scoop out standing water - use a sponge if 
necessary.
5.
Using a spoon, pry off the pump cover (as shown) 
until it clicks, then grip the cover and pull upward 
until it resists and then pull forward (1). Remove 
cover completely.
6.
Check inner compartment and remove any foreign 
objects.
7.
Place pump cover in the original position (2) and 
press down until it engages (3).
8.
Place cover in the original position, press down and 
engage.
9.
Reinstall filters.
10.
Re-insert racks.
Note: The drain pump will not work properly if drain 
pump cover is not snapped in completely until it click.
Preparing your unit for vacation
NOTICE: Before leaving for vacation during warmer 
weather, besides turning off the main valve, also turn off 
water supply at the nearest point to the dishwasher. 
During colder weather, please follow the instructions for 
winterizing your unit below.
Winterizing your unit
NOTICE: If your dishwasher will be unused for a period 
of time in a location that experiences freezing 
temperatures (holiday home or through a vacation 
period), have your dishwasher winterized by a 
professional service.


&OLFN