Perlick HP15TS31RA Installationsanweisungen

Seite von 12
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
2
perlick.com
CONGRATULATIONS
Congratulations on your purchase of a Perlick high 
quality residential Beer Dispenser. Perlick has proudly 
manufactured beer dispensing systems for over 50 years 
for bars, restaurants, stadiums, arenas and large venues 
around the world. That same technology is used in each 
and every residential beer dispenser we produce, assuring 
you’ll pour fresh, cold beer as the brewery intended it to 
be enjoyed. 
All Perlick products are built with commercial grade 
stainless steel, providing you with the beauty and durability 
for a lifetime of use. This installation guide will show you 
how to properly install the dispensing equipment on your 
Perlick Beer Dispenser.
We dedicate considerable time to ensure that our products 
provide the highest level of customer satisfaction. If, 
however, service is required, call Perlick at 800.558.5592. 
For your own protection, never return merchandise for 
credit without our approval.
We thank you again for selecting a high quality Perlick Beer 
Dispenser. Cheers!
C
US
IMPORTANT!
The installation of the actual beer 
dispenser cabinet should happen prior 
to installing the dispensing equipment. 
Refer to the Installation Manual that 
accompanied the Beer Dispenser for step-
by-step installation of the cabinet.
Keep CO2 cylinder away from 
heat. Rupture disc vents at 122°F 
maximum. 
Allow only properly trained and 
experienced personnel to handle 
high pressure gas.
DANGER
WARNING
Do not drop or throw regulator or 
CO2 cylinder. 
DANGER
Do not apply oil to the regulator!
WARNING
PLEASE NOTE
The following instructions are for both the 
Draft Arm (standard tower) and the Adara 
Signature Beer Tower. Some photos and 
drawings may only show the Draft Arm, but 
the instructions will also apply to the Adara 
Signature Beer Tower unless noted.