Frigidaire FGGF304DPF Installationsanweisungen

5

b. drill Pilot holes and fasten bracket - Drill 
a 

1/8" pilot hole where screws are to be located. If 

bracket is to be mounted to the wall, drill pilot hole at 
an approximate 20° downward angle. If bracket is to be 
mounted to masonry or ceramic floors, drill a 3/16" pilot 
hole 1-3/4" deep. The screws provided may be used in 
wood or concrete material. Use a 5/16" nut-driver or flat 
head screwdriver to secure the bracket in place.

 Slide range to 

its final position. Insert the range leveling leg in the anti-tip 
bracket. Visually verify if the anti-tip bracket is engaged. 
Lower the range by adjusting the 4 leveling legs alternatively 
until the range is level. Check if the range is level by placing 
a spirit level on the oven rack. Take 2 readings with the spirit 
level placed diagonally; take a reading in one direction and 
then in the other direction. Level the range if necessary by 
adjusting the leveling legs.