Maytag MGDX6STBW Installationsanweisungen

Remove screws at top, bottom, and side of door (4 screws) 

that hold the inner and outer door together. Holding door over 

towel on dryer, grasp sides of outer door and lift to separate it 

from inner door. Set outer door aside.
NOTE: Do not pry apart with putty knife or screwdriver.  

Do not pull on door seal or plastic door catches.

Remove the door catch, bezel, and plug from the inside of 

the inner door by squeezing and pulling/pushing them. Place 

the door catch, bezel, and plug on the sides opposite from 

where they were.

Plug

Catch and bezel

Rotate outer door 180º and set it back down on inner door. 

Reattach outer door panel to inner door panel so handle is 

on the side where hinges were just removed. Insert 4 door 

screws.

Flip door over so handle side is down. 

Reattach door hinges to dryer door so that the larger hole is 

at the bottom of the hinge.