GE AVM4160DFBS Installationsanweisungen

               

  Insert the toggle wings into the holes in the wall and 

place the mounting plate against the wall.

NOTE: Before tightening toggle bolts and wood screw, 

make sure the tabs on the mounting plate touch the 

bottom of the cabinet when pushed flush against the 

wall and that the plate is properly centered under the 

cabinet.

  Tighten all bolts. Pull the plate away from the wall  

to help tighten the bolts.

Attach the plate to the wall using toggle bolts. At least 

one wood screw must be used to attach the plate to  

a wall stud. Recommended locations on the mounting 

plate are indicated by A, B, C and D.
  Remove the toggle wings from the bolts. 
  Insert the bolts into the mounting plate through  

the holes designated to go into drywall and reattach 

the toggle wings to 

3

ø

4

s onto each bolt. 

B1. Attach Mounting Plate to Wall

B2. Prepare Top Cabinet

B3. Adjust Blower Motor

B4. Install Exhaust Adaptor

B5. Mount Microwave Oven

B6. Connect Ductwork

Wall

Mounting 

Plate

Mounting Plate

Spacing for Toggles More 

Than Wall Thickness

Bolt End

Toggle  

Bolt

Toggle Wings

A

B

C

D