Samsung DV400EWHDWR/ Benutzeranleitung

3

Continuous Run Mode:
1.  Press Wrinkle Prevent + Dry Level for 7 sec during Power On State (Normal User Mode) .
2.  Once in Continuous Run Mode, display “CC” for 1 sec and the number of Cycle for 1 sec and 

the remaining time for 1 sec in turns.

3.  The previous cycle will restart during Continuous Run Mode until the mode is deactivated.
4.  During Continuous Run Mode, press Wrinkle Prevent + Dry Level for 7 seconds to return to 

normal user mode. 

Dryer must be on before Service Mode can be entered.

Upon entry into Service Mode, the Sensor Bar Touch Data will be shown (Default Service 

Mode).

To enter Service Mode, press Wrinkle Prevent and Temp Keys for 3 seconds, until it sends out a 

beeping sound.

- 

If pressing Wrinkle Prevent + Temp Keys for 3 seconds in Service mode , it will return Normal 

mode.

- 

Even though entering Service mode, the operating cycle will not be influenced.

This action will put the dryer into sensor bar touch data mode

Dryer will display Sensor Bar data. This mode is default mode of entering service mode

With Power On pressing Wrinkle Prevent and Temp Keys for 3 seconds

This mode is to bring up the total number of cycles that User have carried out.

How to Enter:
-   To enter cycle count mode press the Wrinkle Prevent in Service Mode. 

It is to retrieve its software version

How to Enter:
- 

At Service Mode, press Temp until it sends out a beeping sound

ex) In case of “U0 05”, U0 means major version “U0” 05 means minor version “05”
- 

If press Temp key In Software Version Mode, it will return Service Mode.

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before 
servicing, unless testing requires power. 

[HUDSON]_Technical_information-03171A_EN.indd   3

2012-02-03   �� 5:01:21