Dorel Eng. 4358-5936 Benutzerhandbuch

With knee still in child

restraint, attach hook to

anchor in vehicle. Push

down firmly and tighten

top anchorage strap.
To adjust top anchorage

strap: See “Adjusting Top Anchorage Strap” section.

NOTE:

If your vehicle does not have an anchor

bracket, tuck the top anchorage strap’s hook under

the child restraint.

Forward-Facing Installation with
Vehicle Belts:

Connect and tighten

harness straps prior to

installing in vehicle.
Place child restraint

flush

against the back of the

vehicle seat

forward-

facing in the back seat.
Thread the vehicle lap

belt or lap/shoulder belt

combination through the

belt path and out other

side. Buckle.

Place one knee in the

child restraint and push

down firmly while pulling

up on belt to tighten. For

a manual belt, refer to

“Knowing your Vehicle

Belt” section.

With weakest hand

at belt path, tilt and

push the child restraint

forward and back, and

from side to side. If the

seat belts do not loosen,

your child restraint

should be secure.

NOTE:

Some “play”

from front to back or

about an inch from side

to side is acceptable. If

it moves more, review

“Knowing Your Vehicle

Belts” and “The Locking

Clip” sections.

WARNING

After checking for hot

seat and buckles, place

your child in the child

restraint as described

in the “Securing Your

Child in the Child

Restraint” section.

Using this child restraint in any vehicle

seat where the lap belt cannot be

tightened securely and properly or

where it can be loosened by pulling on

it can result in serious injury or death.

Forward-Facing Use: 22-40 lbs. (10.1-18 kg), 34-43” (85.1-110 cm), Over 1 year of age.