Dorel Eng. 4358-5936 Benutzerhandbuch

Seite von 22
The top anchorage strap is used for the forward-facing 
position only. 
Most vehicles made after 9/1/99 already have the 
anchor hardware for a top anchorage strap.  Refer to 
your owner’s manual or call your dealer.
Storage of Top Anchorage Strap:  
 
 
Belt-Positioning Booster position:
           Place top anchorage strap and anchor hook
 
under the child restraint. 
See pictures below and on next page to determine 
which top anchorage strap model you have.  Follow 
applicable steps.
26
27
To release LATCH:  
Press down firmly on 
adjuster side of child 
restraint and press release 
button on adjuster to 
release tension.  Unhook 
LATCH hooks. 
After checking for hot 
seat and buckles, place 
your child in the child 
restraint as described in 
the “Securing Your Child 
in the Child Restraint” 
section.
8
 Adjusting the Top Anchorage 
 Strap
To Attach Top 
Anchorage Strap:
Put knee in child 
restraint and push down; 
attach hook to anchor in 
vehicle.
To Adjust Top 
Anchorage Strap:
To tighten; pull on free 
end of top anchorage 
strap.
To loosen; lift up on 
top anchorage lock and 
push lock toward top 
anchorage hook.
Forward-Facing Use: 22-40 lbs. (10.1-18 kg), 34-43” (85.1-110 cm), Over 1 year of age.
Pull loose 
end to 
tighten
Lift up to 
loosen
WARNING
!
LATCH hooks MUST be securely 
fastened.  Failure to do this can result 
in serious injury or death.
With weakest hand at 
belt path, tilt and push the 
child restraint forward 
and back, and from side 
to side. If the LATCH 
belts do not loosen, your 
child restraint should be 
secure.
NOTE:
 Some “play” 
from front to back or 
about an inch from side to side is acceptable. 
If the child restraint does not remain tight, do not 
use the child restraint in this seating location with this 
LATCH system.
7