Meyer Sound MG-3D/M Benutzerhandbuch

PN: 05.132.036.01 B2

Page 25 of 32

Meyer Sound Laboratories Inc.
www.meyersound.com

T: +1 510 486.1166
F: +1 510 486.8356

The combination of the MTB-2D/M transition bar kit and MG-2D multipurpose grid allows you to easily transition from 
MILO to M2D loudspeakers. MTB-2D/M transition bars provide the link needed to attach an MG-2D grid below a MILO 
loudspeaker; a downfill array of M2Ds can then be flown from the MG-2D as required using the full capabilities and 
flexibility of the MG-2D grid. The MTB-2D/M kit contains the bars and quick release pins (QRPs) necessary for the 
transition between MILO and the MG-2D grid.  

For more information on the MG-2D grid, please consult Meyer Sound’s “MG-2D Assembly Guide.”

caution: 

when using combined arrays, the total weight of the array should always be calculated and 

be within specifications before flying the array. Do not exceed the MG-3D/M grid load ratings listed in 

Chapters 2 and 3 of this guide.

2

MTB-2D/M Transition Bar

4

134.007

1/2" x 2.5" QRP

note: 

The approxi-

mate combined weight 

of the MTB-2D/M and the MG-
2D grid is 242 lbs (109.77 kg) 
The M2D loudspeaker weighs 
114 lbs (52.62 kg).