Amana W10196156B Benutzerhandbuch

IMPORTANT: The health of some birds is extremely sensitive to the 
fumes given off during the Self-Cleaning cycle. Exposure to the 
fumes may result in death to certain birds. Always move birds to 
another closed and well-ventilated room.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air 
must be able to move freely. Depending on your model, see “Oven 
Vent” section.
Do not clean, rub, damage or move the oven door gasket. 

■

Remove the broiler pan, grid, cookware and bakeware, all 
cooking utensils, oven racks and aluminum foil and, on some 
models, the temperature probe from the oven.

■

Use a damp cloth to clean inside door edge and the 
1½" (3.8 cm) area around the inside oven cavity frame, being 
certain not to move or bend the gasket.

■

Remove plastic items from the cooktop because they may 
melt.

■

Remove all items from the storage drawer.

IMPORTANT: The heating and cooling of porcelain on steel in the 
oven may result in discoloring, loss of gloss, hairline cracks and 
popping sounds.
Before self-cleaning, make sure the door is completely closed or 
the door will not lock and the self-cleaning cycle will not begin.
Once the oven has completely cooled, remove ash with a damp 
cloth. To avoid breaking the glass, do not apply a cool damp cloth 
to the inner door glass before it has completely cooled.
To stop the self-cleaning cycle at anytime, press CANCEL/OFF. If 
the temperature is too high the oven door will remain locked and 
“cool” and “locked” will be displayed.
Once the cleaning temperature has been reached, the electronic 
control requires a 12-hour delay before another self-clean cycle 
can be started.
The oven light will not function during the self-cleaning cycle.

The self-cleaning cycle can be set at HI self-clean time (4 hours 
30 minutes) or LO self-clean time (3 hours 30 minutes). The 
suggested clean times are 3 hours 30 minutes for light soil, or 
4 hours 30 minutes for heavy soil. The last 30 minutes of the cycles 
is for cool down.

1. Press SELF CLEAN to set the clean time to HI (4 hours 

30 minutes). 

2. Press the TEMP/TIME “More” or “Less” arrow pads to cycle 

between LO and HI clean time.

3. Press START.

The oven door will automatically lock. The CLEAN indicator 
light will be displayed. The time remaining will also be 
displayed.

4. When the self-clean cycle is complete and the oven cools, the 

CLEAN indicator light will turn off.

5. When the oven is completely cooled, remove ash with a damp 

cloth.

IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions on 
cleaning products. For additional information, you can visit the 
Frequently Asked Questions (FAQs) section of our website at 
www.amana.com.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some 
models)

Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire range is cool. These spills may 
affect the finish.
Cleaning Method:

■

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad: 
Gently clean around the model and serial number plate 
because scrubbing may remove numbers.

■

All-Purpose Appliance Cleaner Part Number 31682 (not 
included):
See cover for contact information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use 
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner, 
steel-wool pads, gritty washcloths or abrasive paper towels. 
Damage may occur to stainless steel surfaces, even with one-time 
or limited use.
Cleaning Method:

Rub in direction of grain to avoid damaging.

■

Stainless Steel Cleaner and Polish Part Number 31462 9not 
included): 
See cover for contact information.

Liquid detergent or all-purpose cleaner: 
Rinse with clean water and dry with soft, lint-free cloth.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers, 
ammonia or sodium hydroxide (lye) because paint surface may 
stain.