Bertazzoni X)486GPIRVI Benutzerhandbuch

 

11

The back guard must be installed prior to 
operation of the appliance for appropriate 
ventilation of the oven compartment.  

The supplied back guard is a 2‐part assembly. The 
box also contains a set of metal screws for 
securing the back guard to the worktop. 

 

Disassemble the back guard and position the 
front part on the worktop. Align the screw holes 
with the corresponding holes at the back of the 
worktop. 

 

 

If the holes are not aligned, partially loosen the 
brackets at the back of the worktop as shown 
below.

  

 

Install the front part of the back guard by 
tightening the 2 central screws from the top and 

2 lateral screws from the bottom.