Bertazzoni X)486GPIRVI Benutzerhandbuch

Seite von 52
 
33
throughout the oven cavity for all uses. Multiple 
rack use is possible for baking large amounts of 
food. When roasting, cool air is quickly replaced ‐ 
searing meats on the outside and retaining more 
juices and natural flavour on the inside with less 
shrinkage 
 
CONVECTION 
The rear element operates at full power. Air is 
circulated by the fan for even heating. Use this 
setting for food which requires gentle cooking 
such as pastries, soufflés or cakes.
 
 
TURBO 
The rear and bottom elements operate at full 
power. Air is circulated by the fan for even 
heating. Use this setting to reduce pre‐heating 
time of the oven or for recipes which require 
uniform cooking with strong heat from bottom 
such as pizza, focaccia, bread
 
TIPS FOR CONVECTION and 
BAKE/CONVECTION/TURBO  
 
Preheating the Oven  
Preheat the oven before baking. The oven does 
not need to be preheated for large pieces of 
meat or poultry. See your recipe for preheating 
recommendation. Preheating time depends on 
the temperature setting and the number of racks 
in the oven. 
 
Temperature Setting  
When using Convection Bake, reduce the 
temperature recommended in the recipe by 25°F. 
When roasting meats, check internal 
temperature prior to time recommended by 
recipe to prevent over cooking. When roasting 
meats in convection mode, do not reduce 
temperature setting. 
 
Condensation  
It is normal for a certain amount of moisture to 
evaporate from the food during any cooking 
process The amount depends on the moisture 
content of the food. The moisture will condense 
on any surface cooler than. the inside of the 
oven, such as the control panel. 
 
RACK POSITIONS 
Large Main Oven One Rack Baking  
When baking on one rack, best results are 
obtained in the bake mode (see Bake). 
When roasting a turkey or a large piece of meat, 
convection bake may be used. Rack 4 is the most 
appropriate rack. 
 
Two Rack Baking  
Racks 4 and 2 are most appropriate when using 
the convection bake mode. Round cake pans 
should be staggered on racks 4 and 2. 
Rectangular (9 x 13) cake pans and cookie sheets 
should be placed on rack 4 directly under the one 
on rack  2. 
This may be used for cakes, cookies, biscuits and 
other foods for which two rack baking is 
desirable. 
When several casseroles, frozen pies or cakes are 
to be baked, use racks 4 and 2. 
These two racks can also be used for a large oven 
meal. 
 
Bake ware Type 
Aluminium bake ware gives the best browning 
results. 
Cookie sheets with only two sides give the best 
results. Aluminium commercial half‐sheets or 
professional cooking utensils may be used but 
baking times may be increased. 
 
Placement 
For better browning, utensils such as cookie 
sheets. Rectangular baking pans should be placed 
crosswise on the rack with the shorter side facing 
right and left to allow better air flow. 
When baking on more than one rack, cookie 
sheets and rectangular (9 x 13) cake pans should 
not be staggered; round cake pans should be 
staggered. 
 
Settings for  BAKE/CONVECTION and 
BAKE/CONVECTION/TURBO cooking modes 
 
These cooking modes are for baking, roasting or 
warming using one or two racks. 
 
1. Select  BAKE/CONVECTION or BAKE/ 
CONVECTION/TURBO using the Selector 
switch. 
2.  Set the oven temperature using the oven 
temperature control knob (not over 
Tmax=500°F setting position). If using 
CONVECTION, set the oven control knob 25°F 
below temperature suggested in the recipe. 
Do no change recipe temperature if roasting 
meats or poultry.