Amana W10330188C Benutzerhandbuch

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

On some models, the oven door can be removed. See the “Oven 
Door” section first.

■

Steel-wool pad

■

Oven cleaner: Follow product label instructions.

■

Steel-wool pad

BROILER PAN AND GRID (on some models)

Wash in warm soapy water. (It is not recommended to wash the 
chrome grid in a dishwasher.)

A mild abrasive cleaner and a plastic scrubber can be used to 
remove stubborn stains.

For heavily soiled bowls, place an ammonia soaked paper towel 
on the stains and allow to soak for a short time, then gently scrub 
with a plastic scrubber.

■

Warm soapy water or dishwasher

■

Oven cleaner: Follow product label instructions.

The oven light is a standard 40-watt appliance bulb. Press the 
manual oven light switch on the backguard to turn on and off.

Before replacing, make sure the oven and cooktop are cool and 
the control knobs are off.

1. Unplug range or disconnect power.

2. Turn bulb counterclockwise to remove from socket.

3. Replace bulb.

4. Plug in range or reconnect power.

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

1. Open the oven door. Insert hinge pins, included with your 

range, into both hinge hangers. Do not remove the pins while 
the door is removed from the range.

2. Grasp the door on the sides with your fingers on the front of 

the door and your thumbs on the inside surface.

3. Pull door straight up, then toward you. Do not remove hinge 

pins until the door is replaced on the range.

1. Grasp the door on the sides with your fingers on the front of 

the door and your thumbs on the inside surface.

2. Hold oven door so that the top edge of each door slot is 

horizontal. Insert door hinge into the hinge slots.

3. Tilt top of door toward range. Insert bottom door hinge notch 

down onto front frame edge.

4. Open the door completely and remove the hinge pins. Save 

hinge pins for future use.

5. Close the door slowly to assure door side panel clearance 

and proper hinge engagement.

A