Amana W10330188C Benutzerhandbuch

When power is first supplied to the appliance, a flashing time will 
appear on the display. Press CANCEL/OFF to clear flashing time 
from the display. 

If flashing time appears, a power failure has occurred. Press 
CANCEL/OFF and reset the Clock if needed.

When the oven is not in use, the display shows the time of day.

When performing a cook or timer function, the display will show 
either hours and minutes, or minutes and seconds.

The indicator lights are located on both sides of the display. The 
indicator lights light up or flash when the oven is in one of the 
following modes: Bake, Broil or Timer.

The Start pad begins any oven function. If the Start pad is not 
pressed within 5 seconds after pressing a function pad, the Push 
to Start (“PSH”) indicator light will flash and the push to start tone 
will sound as a reminder.

If the START pad is not pressed within 1 minute after pressing a 
function pad, the oven display will return to the time of day mode 
and the programmed function will be canceled.

The Cancel/Off pad stops any function except the Clock, Timer 
and Control Lock.

This is a 12-hour clock and does not show a.m. or p.m.

Before setting, make sure the oven and Timer are off.

1. Press CLOCK.

2. Press the TEMP/HOUR “up” or “down” arrow pads to set the 

time of day.

3. Press CLOCK or START.

Tones are audible signals, indicating the following:

■

Valid pad press

■

Oven is preheated (long tone)

■

Function has been entered

■

Invalid pad press

■

Push to start reminder

■

End of cycle

The temperature is preset at Fahrenheit, but can be changed to 
Celsius.

To Change: Press and hold BROIL for 5 seconds. A tone will 
sound, and “C” will appear on the display. Repeat to change 
back to Fahrenheit. To exit mode, press CANCEL/OFF.

The timer can be set in hours or minutes up to 12 hours and 
59 minutes, and counts down the set time either in hours and 
minutes, or in minutes and seconds. The timer does not start or 
stop the oven.

1. Press TIMER. The timer indicator light will light up. If no 

action is taken after 1 minute, the display will return to the 
time of day, bake or broil mode.

2. Press the TEMP/HOUR “up” or “down” arrow pads to set the 

length of time.

3. Press START. When the set time ends, end-of-cycle tones will 

sound.

4. Press TIMER pad twice anytime to cancel the timer and 

reminder tones.

If the CANCEL/OFF pad is pressed the oven will turn off and the 
cook function will be disabled.

To display the time of day for 5 seconds when the timer is 
counting down, press CLOCK pad.

If the START pad is not pressed within 5 seconds after pressing 
the TIMER pad or TEMP/HOUR arrow pads, the “PSH” indicator 
light will flash and the push to start tone will sound as a reminder.

The timer can be reprogrammed to change the time while it is 
running.

1. Press TIMER.

2. Press TEMP/HOUR “up” or “down” arrow pads to adjust 

time.

3. Press START.

.

I

H

G

F

E

D

C

B

A