Samsung RF4267HABP Benutzerhandbuch
![Samsung](https://files.manualsbrain.com/attachments/d2c8096d7455ef27430abd90929788cd334aa0d9/common/fit/150/50/48a08a3a1c58307d54cf32c153d229d06984b46e0de4abbefb9df295a8d8/brand_logo.png)
setting up
_09
01
SETTING
UP
The left door is fixed. To make minor
adjustments between doors, adjust only the
right door.
adjustments between doors, adjust only the
right door.
1. Pull out the Convertible door ( 1 ) to expose the
lower hinge (
2 ).
2. Insert the supplied allen wrench (3/16”) ( 3 ) into
the shaft (
4 ) of the lower hinge.
3. Please adjust the height by turning the hex
wrench (
3 ) clockwise (
DOWN
) or counter-
clockwise (
UP
).
When you turn the hex wrench counter-
clockwise (
clockwise (
), the door will move up.
1. After adjusting the doors, insert the supplied
fastener (
6 ) using a pliers ( 5 ) in the gap
between the hinge-grommet (
7 ) and the lower
hinge (
8 ). The number of fasteners you’ll need to
insert depends on the gap.
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 0.04”.
The thickness of each fastener is 0.04”.
ADJUSTING THE FREEZER DRAWER
LEVEL
LEVEL
1. Locate the height-adjuster ( 1 ) in the freezer
drawer.
Unscrew the 8 Phillips screws ( 2 ) slightly to
loosen the door.
2. Loosen the controller
screw (
3 ) with a Phillips
screwdriver (+).
3. Find the best level
to align the door
slope.
slope.
• After
adjustment,
tighten the
controller screw
(
tighten the
controller screw
(
3 ) and then
philips screws.
3
1
2
3
4
Freezer Drawer
Adjustment part
1
2
3
Example) The slope is about 0.08inch (2mm) as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
- Rotate the height adjuster to -2.0 to reduce the door slope.
Slope
Reference
plane
Adjustment
part
part
Fixed part
DA68-02481A-10.indb 9
13. 4. 25. �� 2:18