Frigidaire 316902315 Benutzerhandbuch

31

Fig. 3

1. Open oven door completely (horizontal with floor - See Fig.

1).

2. Pull the door hinge locks on both left and right door hinges

down from the oven frame completely towards the oven door

to unlock (See Fig. 2). A tool such as a small flat-blade

screwdriver may be required.

3. Firmly grasp both sides of oven door along the door sides (Do

not use the oven door handle).

4. Close the door to the broil stop position. The oven door will

stop into this position just before fully closing.

5. With the oven door in the broil stop position (Fig. 3), slightly

lift and carefully pull the oven door away from the oven

frame. To avoid finish damage, be careful not to allow the

oven door hinges to contact the oven front frame.

Special door care instructions - Most oven doors contain

Oven door hinge

locations

with oven door

fully open.

Fig. 1

Fig. 2

Fig. 4

pin

about

10°

oven

door

door

hinge

arm

pin

LOC

K

To avoid possible injury when removing or replacing the oven

door, follow the instructions below carefully and always hold

the oven door with both hands positioned away from the door

hinge area.

1. Firmly grasp both sides of oven door along the door sides

(Do not use the oven door handle).

2. Holding the oven door at the same angle as the removal

position (See Fig. 3), carefully line up and insert both door

hinge arms between the pins located on each side of the

oven door frame (See Fig. 4).

3. With both door hinge arms in place, open the oven door

(horizontal with floor - See Fig. 1).

4. Push the door hinge locks up towards and into the oven

frame for both left and right oven door hinges to the locked

position (See Fig. 2).

5. Close the oven door.

The oven door is heavy. For safe, temporary storage, lay the

door flat with the inside of the door facing down.

• DO NOT close the oven door until all the oven racks are fully

positioned inside the oven interior.

• Do not hit the glass with pots, pans, or any other object.
• Scratching, hitting, jarring or stressing the glass may

weaken its structure causing an increased risk of breakage

at a later time.

Read the following recommendations: