Frymaster CM4-S Benutzerhandbuch

(PROGRAMMED FOR TEXAS CHICKEN) 

 

 

5 

 
 
 
 
 

 
 
 
 

 
The filtration can be eliminated, if necessary, by following these steps. This process 
zeros the filter count 
 

1.  At the completion of a cook cycle, the computer 

display flashes 

FILTER.  

2. Press 

the 

 

button to turn computer OFF. 

3.  Press the hidden programming button. See 

Figure 1. 

4. 

CODE is displayed on the left side of the 
computer. 

5.  Enter 1119 with the numbered keys. 

6. 

CLR FLTR FUNCTION flashes in display and computer displays OFF 

7.  Turn the computer on to continue cooking.   

Boil out is necessary before using a fryer for the first time and at prescribed times as 
part of preventive maintenance.  Follow these steps to boil out a frypot: 
 

1.  Ensure the shortening is at 

operating temperature. 

2. Press 

the 

 

button to turn 

computer OFF. 

3.  Pull (gas fryers) or lift (electric 

fryers) the red-handled drain-
valve lever. The shortening will 
flow into the filter pan. 

4.  Close the drain valve when all 

shortening is drained. 

5.  Ensure the Shortening Disposal 

System is connected and 
working properly.  Turn the blue 
handle in the filter cabinet to 
DISPOSE to dispose of spent shortening in the filter pan.  Ensure all shortening is 
pumped from filter pan and lines before turning blue handle to OFF.  Remove and 
thoroughly clean filter pan and components.  Do not replace filter pan until boil-out 
procedure is completed. 

6.  Fill the frypot to the top OIL LEVEL line with clean water. 
7.  Pour in boil-out cleaning detergent. 
8.  Press the hidden programming key on the computer (See Figure 1). 
9. 

CODE appears on the left display of the computer. 

10. Enter 1115. 
11. 

Boil Out appears in the left display.  Press Check to Start appears 
in the rights display. 

12. Press the 

 

button. 

13. 

Boil Out appears in the left display; a time display, which starts at 30:00 

Never leave the fryer unattended during boil 
out. If the boil-out solution boils over, turn 
the computer off immediately and let the 
solution cool before resuming the process. 

Do not drain boil-out solution into the built-in 
filtration system. It can damage the filter 
pump. 

Note: Using the 1119 code 
zeros out the cook count, 
which triggers a filter prompt. A 
filter prompt will not reappear 
until the cook count reaches 
the preset number for a filter 
prompt.