LevelOne GSW-2453 Benutzerhandbuch

 

6

 

 

The 3-pronged power plug, 2 fans, power switching is located at the rear panel of the 

GSW-2453 as shown in Figure 2-2. The switch will work with AC power in the range of 

100-240V AC, 50-60Hz. 

 

 

Figure 2-2. The Rear Panel

 of the 3-slot Gigabit Cassis switch

 

 

 

 

Set the Switch on a sufficiently large flat space with a power outlet nearby. The surface 

where you put your Switch should be clean, smooth, level and sturdy. Make sure there 

is enough clearance around the Switch to allow attachment of cables, power cord and 

allow air circulation. 

 

Attaching Rubber Feet 

 

A.  Make sure mounting surface on the bottom of the Switch is grease and dust free.   

B.  Remove adhesive backing from your Rubber Feet.   

C.  Apply the Rubber Feet to each corner on the bottom of the Switch. These footpads 

can prevent the Switch from shock/vibration. 

 

 

 

The switch come with a rack-mounted kit and can be mounted in an EIA standard size, 

19-inch Rack. The Switch can be placed in a wiring closet with other equipment. 

 

Perform the following steps to rack mount the switch: