LevelOne GSW-2453 Benutzerhandbuch

 

                                                                               

 

7

 

A.  Position one bracket to align with the holes on one side of the switch and secure it 

with the smaller bracket screws. Then attach the remaining bracket to the other 

side of the Switch. 

B.  After attached both mounting brackets, position the switch in the rack by lining up 

the holes in the brackets with the appropriate holes on the rack. Secure the Switch 

to the rack with a screwdriver and the rack-mounting screws. 

Note: For proper ventilation, allow about at least 4 inches (10 cm) of clearance on 

the front and 3.4 inches (8 cm) on the back of the Switch. This is especially 

important for enclosed rack installation. 

 

 

 

Connect the power cord to the power socket on the rear panel of the Switch. The other 

side of power cord connects to the power outlet. The internal power supply of the 

Switch works with voltage range of AC power in the 100-240VAC, frequency 50~60Hz. 

Check the power indicator on the front panel to see if power is properly supplied.