Rose electronic 2xE Benutzerhandbuch

 

Appendix J.  Rack mount 
 
The optional rack mount kit includes the following items: 
„  Two black anodized mounting brackets. 
„  Four 6 - 32 x 3/8” flat head mounting screws. 
 
To rack mount your Ultramatrix switch, attach the two rack mounting 
brackets to your Unit with the short flange against the Unit using the 
four screws provided.  Secure the mounting brackets to the rack using 
the appropriate size bolts, nuts and lock washers.  Using hardware 
other than that provided could cause damage to the electronics and/or 
result in loss of mounting integrity.  Do not over tighten the screws used 
to mount the Unit to the mounting brackets. 
 
The following general guidelines should be observed when installing 
your Unit into a rack. 
 
a).  The Ultramatrix is designed to work in an ambient temperature of 

0

ο 

C to 45

ο 

C (32

ο 

F – 113

ο

 F). 

b).  Do not block power supply vents or otherwise restrict airflow when 

rack-mounting this Unit. 

c).  Mechanical loading of the rack should be considered to prevent 

instability and possible tipping over. 

d).  Tighten all connectors securely and provide adequate strain relief 

for all cables. 

e).  Provide a grounded power source to all Units.  Pay special 

attention to overall branch circuit load ratings before connecting 
equipment to this source.  Overloaded circuits are potential fire 
hazards and can cause equipment failures or poor performance. 

 
 
Appendix K. Rack mount illustration