NEC NP52G Benutzerhandbuch

. Usng On-Screen Menu

Usng the Wall Color Correcton [WALL COLOR]

This function allows for quick adaptive color correction in applications where the screen material is not white.

Settng Lamp Mode to Normal or Eco [LAMP MODE]

This feature enables you to select two brightness modes of the lamp: NORMAL and ECO modes. The lamp life
can be extended by using the ECO mode. Selecting ECO mode decreases fan noise when compared to NORMAL
mode.

Lamp Mode

Description

Status of LAMP indicator

NORMAL MODE

This is the Default setting
(100% Brightness).

Off

ECO MODE

Select this mode to increase the
lamp life (NP62/NP61: approx.75%
Brightness/ NP52/NP41: approx.85%
Brightness)

Steady Green light

NOTE:

• The [LAMP LIFE REMAINING] and [LAMP HOURS USED] can be checked in [USAGE TIME]. Select [INFO.]

→ [USAGE TIME]. (→

page

)

• The projector is always in [NORMAL] for one minute after the lamp is turned on and while the POWER indicator is blinking

green. The lamp condition will not be affected even when [LAMP MODE] is changed.

• If there is no signal for about one minute, the projector will display a blue, black or logo background (depending on setting)

and go into [ECO].

The projector will return to the [NORMAL] once a signal is accepted.

• If the projector is overheated in [NORMAL] mode because of use in a high-temperature room , there may be a case where the

[LAMP MODE] automatically changes to [ECO] mode to protect the projector. This mode is called "forced ECO mode". When

the projector is in [ECO] mode, the picture brightness decreases. The LAMP indicator's steady light indicates the projector is

in [ECO] mode. When the projector comes back to normal temperature, the [LAMP MODE] returns to [NORMAL] mode.

Thermometer symbol [ ] indicates the [LAMP MODE] is automatically set to [ECO] mode because the internal temperature

is too high.

Selectng Menu Language [LANGUAGE]

You can choose one of 21 languages for on-screen instructions.

NOTE: Your setting will not be affected even when [RESET] is done from the menu.