NEC NP52G Benutzerhandbuch
3
. Usng On-Screen Menu
Selectng Menu Color [MENU COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Selectng Menu Dsplay Tme [MENU DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is
the factory preset.
The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is
the factory preset.
Selectng a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is
[LOGO].
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
[LOGO].
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
Selectng Communcaton Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). It supports data rates from 4800 to 38400
bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending
on the equipment, a lower baud rate may be recommended for long cable runs).
NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending
on the equipment, a lower baud rate may be recommended for long cable runs).
NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.