NEC NP52G Benutzerhandbuch
7
. Usng On-Screen Menu
Enablng Auto Power On [AUTO POWER ON(AC)]
Turns the projector on automatically when the power cable is inserted into an active power outlet. This eliminates
the need to always use the POWER button on the remote control or projector cabinet.
the need to always use the POWER button on the remote control or projector cabinet.
Turnng On the Projector By Applyng RGB Sgnal [AUTO POWER ON(COMP.)]
When the projector is in Standby mode, applying an RGB signal from a computer connected to the COMPUTER
IN input will power on the projector and simultaneously project the computer's image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector
cabinet to power on the projector.
To use this function, first connect a computer to the projector and the projector to an active AC input.
IN input will power on the projector and simultaneously project the computer's image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector
cabinet to power on the projector.
To use this function, first connect a computer to the projector and the projector to an active AC input.
NOTE:
• Disconnecting an RGB signal from the computer will not power off the projector. We recommend using this function in com-
bination of the AUTO POWER OFF function.
• This function will not be available under the following conditions:
- when a component signal is applied to the COMPUTER IN connector
- when a Sync on Green RGB signal or composite sync signal is applied
- when [POWER-SAVING] is selected for [STANDBY MODE]
Enablng Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min.,
10min., 20min., 30min.) if there is no signal received by the COMPUTER, VIDEO, or S-VIDEO input.
10min., 20min., 30min.) if there is no signal received by the COMPUTER, VIDEO, or S-VIDEO input.
Selectng Default Source [DEFAULT SOURCE SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ..................................Sets the projector to default to the previous or last active input each time the projector is
turned on.
AUTO ..................................Searches for an active source in order of COMPUTER
→ VIDEO → S-VIDEO → COMPUTER
and displays the first found source. ([AUTO] is not available for the Viewer source on the NP62
and NP52.)
COMPUTER ........................Displays the RGB source from the COMPUTER IN connector every time the projector is turned on.
VIDEO .................................Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO .............................Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
VIEWER (NP62/NP52) .......Displays images stored in a USB memory or images transmitted wirelessly from your com-
VIDEO .................................Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO .............................Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
VIEWER (NP62/NP52) .......Displays images stored in a USB memory or images transmitted wirelessly from your com-
puter or mobile phone with Bluetooth wireless technology.