NEC NP52G Benutzerhandbuch

. Usng On-Screen Menu

Enablng Key Sound and Error Sound [BEEP]

This feature turns on or off the button sound or alarm when the following operations are performed.

- displaying the main menu
- switching sources
- Resetting data by using [RESET]
- Pressing POWER ON or POWER OFF button

[OPTIONS()]

Usng Off Tmer [OFF TIMER]

1. select your desired time between 30 minutes and 16 hours: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00,

16:00.

2. Press the enter button on the remote control.
3. the remaining time starts counting down.
4. the projector will turn off after the countdown is complete.
NOTE:

• To cancel the preset time, set [OFF] for the preset time or turn off the power.

• When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN

3 MINUTES] message will be displayed on the bottom of the screen.

Selectng Power-savng n [STANDBY MODE]

The projector has two standby modes: [NORMAL] and [POWER-SAVING].
Power-saving mode is the mode that allows you to put the projector in the power-saving condition which con-
sumes less power than the NORMAL mode. The projector is preset for NORMAL mode at the factory.
NOTE:

• Control through the PC Control connector is not available during POWER-SAVING mode. For PC control of the projector it is

recommended to leave the projector in the Normal mode.

• Your setting will not be affected even when [RESET] is done from the menu.

NORMAL ....................... Power indicator: Orange light/STATUS indicator: Green light
POWER-SAVING ........... Power indicator: Orange light/STATUS indicator: Off