Emerson GXT2-10000RT208 Benutzerhandbuch

Factory default settings illustrated.

The UPS will estimate remaining operating time when on batteries. A low battery alarm is activated 

if the estimated time reaches the Low Battery Time. This may be changed to any value from 2 to 30 

minutes.

The UPS performs an automated battery test periodically, if enabled. The user may also set the UPS 

to test at intervals of 7, 14, 21, and 28 days.

If additional batteries are attached to the UPS, accurate battery run time estimates are possible if the 

battery number and type of batteries are entered here. The new UPS models are designed to operate 

with up to four external battery packs or four long run time (LRT) battery packs (not currently avail-

able).

In some applications it may be preferable to disable the automated, periodic battery test. Click on the 

box to remove the check mark and disable the periodic battery test.

The UPS will provide computer grade power during power outages. If input power is unavailable for 

an extended time, the UPS will shut down when batteries are depleted, or a shutdown signal is sent 

by the computer operating system to limit battery depletion (serial data or contact closure). If Auto 

Restart is enabled (check mark in box), the UPS will restart when input power is restored. If the UPS 

turns off power to the load for any other reason, manual restart is required (See 8.7 - Options Tab 

for exceptions). Click on the box to remove the check mark and disable Auto Restart.