Zebra Technologies 105SLTM Benutzerhandbuch
129
Troubleshooting
Miscellaneous Printer Problems
6/30/06
105SL User Guide
11342L-001 Rev. A
The printer fails to
calibrate or detect the
top of the label.
calibrate or detect the
top of the label.
The printer was not calibrated
for the label being used.
for the label being used.
Perform the calibration procedure in
.
The printer is configured for
continuous media.
continuous media.
Set the media type to noncontinuous media. See
.
The driver or software
configuration is not set
correctly.
configuration is not set
correctly.
Driver or software settings produce ZPL
commands that can overwrite the printer
configuration. Check the driver or software
media-related setting.
commands that can overwrite the printer
configuration. Check the driver or software
media-related setting.
Non-continuous
labels are being
treated as continuous
labels.
labels are being
treated as continuous
labels.
The printer is configured for
continuous media.
continuous media.
Set the media type to noncontinuous media. See
.
The printer was not calibrated
for the media being used.
for the media being used.
Perform the calibration procedure in
.
All lights are on, but
nothing displays on
the LCD, and the
printer locks up.
nothing displays on
the LCD, and the
printer locks up.
Internal electronic or firmware
failure.
failure.
Call a service technician.
The printer locks up
while running the
Power-On Self Test.
while running the
Power-On Self Test.
Main logic board failure.
Call a service technician.
Table 17 • Miscellaneous Printer Problems (Continued)
Problem
Possible Cause
Recommended Solution