Ricoh AP610N Benutzerhandbuch

Paper and Other Media

22

❒ The settings of custom sized paper

that take effect are not the settings
made on the control panel but the
settings made in the printer driver.
There is no need to change the set-
tings on the control panel. Howev-
er, when using a printer driver
other than RPCS, you will need to
change the settings on the control
panel.

❒ Applications that do not allow a

custom paper size to be set cannot
print on custom sized paper.

❒ If you print on A3 or longer sheets,

prints may become blurred.

A

Press the {Menu} key.

The [Menu] screen appears on the
display.

B

Press the {U} or {T} key to dis-
play [Paper Input], and then press
the {# Enter} key.

The paper selection menu appears.

C

Check  [Bypass Size] appears, and
then press the {# Enter} key.
The paper size selection menu ap-
pears.

D

Press the {U} or {T} key to dis-
play [Custom Size], and then press
the {# Enter} key.

E

Press the {U} or {T} key to set the
horizontal value, and then press
the {# Enter} key.

By pressing the key, the value in-
creases or decreases by 0.1 mm. By
pressing and holding the key, the
value varies by 1 mm.

F

Press the {U} or {T} key to set the
vertical value, and then press the

{# Enter} key.

After about two seconds, the dis-
play returns to the menu.

G

Press the {Online} key.
The initial screen appears.

For details about the printer
driver, see the printer driver
Help.

  Menu:

   Paper Input

AGN503S

  Custom Size:

  Horiz.  210.0 mm

  Custom Size:

  Vert.   297.0 mm

KirP4GB_Mainte-F6_FM_forPaper.book  Page 22  Thursday, May 12, 2005  11:48 AM