Citizen Systems PD-04 Benutzerhandbuch

– 11 –

The fully recharged battery pack will operate the printer for approximately 2 hours.

(When printing by the method described in the specifications on page 35)

When the battery becomes depleted and is in need of recharging, the green POWER

lamp will start to flash.

When this occurs, please recharge the battery pack as explained on page 9 as soon

as possible.

If the user continues to use the depleted battery pack, the power will cut out and any

data in the printer will be lost.

[ Please use a household AC 120V for U.S.A. version or AC 220-240V for Europe

version current to recharge the battery pack.

[ Be careful not to allow any water, metal pieces or foreign objects to fall into the

unit.

[ Do not try to alter the recharger or open its cabinet.
[ Do not damage the power cord or make adjustments to it. This could lead to an

electrical leak or breakage.

[ Do not drop the recharger or expose it to powerful shocks.
[ Do not use the recharger in the following environments.

• In a place that gets direct sun light, or next to a heater.

• In a place where there is a lot of humidity, soot or steam.

• In a place that experiences a high degree of vibration or is unstable.

[ During use many vibration sounds will come from the printer, but this does not

indicate that the unit is broken.

[ Do not place the recharger near a radio, there will be interference. Recharge the

battery pack away from any radio. When not in use unplug the recharger from the

wall outlet.