Citizen Systems PD-04 Benutzerhandbuch

– 13 –

This printer uses thermal print paper, and not an ink ribbon.  There are four ways to

insert paper into the printer depending on the paper, the paper course and the roll

paper holder.

1

Inserting paper from the Rear.

2

Feeding Single Sheets From the Top

3

Using the roll paper holder

4

Feeding sheets from the Bottom

1 Turn  the printer on.

[ If the paper depress lever is up,

please put it in the down position.

[ The error lamp will be blinking at this

time

2 Place the edge of the paper straight

forward into the insert slot.
[ As in the illustration on the right, push

the paper into the slot until it stops

against the inner apparatus (push until

the error lamp stops blinking and turns off).

In just a few seconds the paper will

automatically feed in and the printer will

enter the ready to print mode.

3 When the paper is inserted a little crookedly.

[ Pull up the paper depress lever and

press down the feed button until the

paper straightens.