Intel 8205 Benutzerhandbuch

8

1 From the Configuration menu, select Connection

Setup.

2  Double-click the LAN 1 port in the

Ports/Connections list.

3  Type a new IP address for the router, which must

be within the range of IP addresses your DHCP

server assigns (and on the same subnet as your

LAN).

4  Click OK.
5  On the Connection Setup dialog, click Accept.
6  From the Configuration menu, select Save to Flash

Memory.

7   Click Yes when asked if you want to proceed.

1  Disconnect the PC from the router (and reconnect

it to the normal network).

2  On the back of the router, set the Hub/PC switch

to “Hub”.

3  Connect the LAN 1 port on the router to the local

network (to an Ethernet hub or switch, for

example).

Firewall filtering and local servers
To increase security to your local LAN, or to manage

the types of traffic allowed on the LAN, you can set

up firewall filters. If you have any servers on your

local LAN that must be accessible from the Internet,

you need to set up the LAN 2 port to translate the

internal server address to the external address
received from the ISP. See page 10.

Figure 13. Change the LAN 1 IP address. Type an IP
address on the same subnet as your local network.

7075

DSL modem

Intel® Router

provides firewall

filters

Intel Router

Status

LAN

WAN Link

WAN Switch

WAN Control

Test Mode

100 Mbps

WWW server must

be accessible

from the Internet

Internet

Figure 14. Firewall filtering and access to servers
on your LAN from the Internet.

A43586-001.p65

10/24/00, 10:44 AM

8