Intel 8205 Benutzerhandbuch

9

Intel® Router

Intel Router

Status

LAN

WAN Link

WAN Switch

WAN Control

Test Mode

100 Mbps

xDSL/Cable

modem

LAN 2 port gets static

IP address from ISP

LAN 1 port connects

to the local network

using this IP address:

192.168.1.1

7072

PC

PC

E-mail Server

192.168.1.10

Internet users must be

able to access this internal

e-mail server

ISP/

Internet

In this scenario, you get a permanent (static) IP

address from your ISP. The following section

describes how to configure the static IP address. This

section also describes how to set up firewall filters

on the LAN 2 port, and allow access to local servers

(such as WWW or e-mail) from the Internet.

1 From the Configuration menu, select Connection

Setup.

2  Double-click the LAN 2 port in the

Ports/Connections list.

3  On the first wizard screen, click “Connect to the

Internet through a DSL modem”, and then click

Next.

5  Click Static IP Address.
6  Type the IP Address and Network Mask assigned

by your ISP.

7  Type the ISP Gateway Address (the IP address of

the ISP’s gateway router). Contact your ISP if you

are not sure about this setting.

8  Click Next. See the next page of this guide for

instructions on the following wizard dialog boxes,

if applicable.

Figure 15. Scenario using a static IP address and
internal servers accessible from the Internet.

Figure 16. Configure a static IP address on the
LAN 2 port.

A43586-001.p65

10/24/00, 10:44 AM

9