TP-LINK 150Mbps Universal WiFi Range Extender Benutzerhandbuch
TL-WA750RE
150Mbps Universal WiFi Range Extender User Guide
19
Operation Mode - Shows the current operation mode.
Wireless MAC Filtering - Click the Enable button to trigger the Wireless MAC Address
Filtering function. The default setting is disabled.
To Add a Wireless MAC Address filtering entry, click the
Add New… button. The “Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-12.
Figure 4-12 Add or Modify Wireless MAC Address Filtering entry
MAC Address - Enter the wireless station's MAC address that you want to control.
Description - Give a simple description of the wireless station.
Status - Select a status for this entry, either Enabled or Disabled.
To set up an entry, follow these instructions:
First, you must decide whether the unspecified wireless stations can access the device or not. If
First, you must decide whether the unspecified wireless stations can access the device or not. If
you desire that the unspecified wireless stations can access the device, please select the radio
button
Deny the stations specified by any enabled entries in the list to access, otherwise,
select the radio button
Allow the stations specified by any enabled entries in the list to
access.
To add a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the
1. Enter the appropriate MAC Address into the
MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-B0-00-0B.
2. Enter a simple description of the wireless station in the
Description field. For example:
Wireless station A.
3. Select
Enabled or Disabled for this entry on the Status pull-down list.
4. Click the
Save button to save this entry.
To add additional entries, repeat steps 1-4.
To modify or delete an existing entry:
1. Click the
1. Click the
Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the
3. Click the
Save button.
Click the
Enable All button to make all entries enabled