Vanguard Managed Solutions 7300 Series Benutzerhandbuch
Vanguard 7300 Enclosures and Components
2-39
Vanguard 7300 Cards
Token Ring Card
Introduction
This card provides two 4/16Mbps token ring ports for the 7300 platform. This card
conforms to the IEEE802.5 standard for token ring. The 7300 supports one token
ring card per box. Each port is independently operated at either 4 or 16Mbps. Either
a UTP or STP cable can be used by connecting the cable to the appropriate port. The
cable type is automatically selected. A standard RJ45 connector will be provided for
UTP and a standard DB9 connector will be provided to STP cables. Figure 2-27
shows the front of the Token Ring card.
conforms to the IEEE802.5 standard for token ring. The 7300 supports one token
ring card per box. Each port is independently operated at either 4 or 16Mbps. Either
a UTP or STP cable can be used by connecting the cable to the appropriate port. The
cable type is automatically selected. A standard RJ45 connector will be provided for
UTP and a standard DB9 connector will be provided to STP cables. Figure 2-27
shows the front of the Token Ring card.
Warning
Attaching a CTP cable to a UTP port damages the token ring card.
Figure 2-27. Token Ring Card
Front Panel LEDs
This table describes the two LEDs located on the front panel of the Token Ring card:
Token Ring Card
Functions
Functions
The Token Ring card supports:
• Routing, Source Route Bridging, and LLC conversion
• Bridging between Ethernet port and Token Ring Port (Translational Bridging)
• Shared token rings with dedicated connection to file servers
• 4-Mbps or 16-Mbps connections
• STP (DB9) and UTP (RJ45) cable types
STP
STP
UTP
POR
T 1
UTP
EXT
ST
POR
T 2
LED
Color
Indication
ST
Green
Not Used
EXT
Blue
Not Used