X-Micro Tech. XWL-11GRTX Benutzerhandbuch

setup the connection through PPPoE protocol

whenever you send the data packets out through the

WAN interface; there are a watchdog implemented

to close the PPPoE connection while there are no

data sent out longer than the idle time set.

Manual connection type means to setup the

connection through the PPPoE protocol by clicking

the Connect button manually, and clicking the

Disconnect button manually.

Idle Time

If you select the PPPoE and Connect on Demand

connection type, fill in the idle time for

auto-disconnect function. Value can be between 1

and 1000 minutes.

MTU Size

Fill in the mtu size of MTU Size. The default value is

1400. Refer to 4.23 What is Maximum Transmission

Unit (MTU) Size?

Attain DNS

Automatically

Click to select getting DNS address for PPPoE

support. Please select Set DNS Manually if the

PPPoE support is selected.

Set DNS Manually

Click to select getting DNS address for Static IP

support.

DNS 1

Fill in the IP address of Domain Name Server 1.

DNS 2

Fill in the IP address of Domain Name Server 2.

DNS 3

Fill in the IP address of Domain Name Server 3.

Clone MAC Address Fill in the MAC address that is the MAC address to

be cloned. Refer to 4.24 What is Clone MAC

Address?

Enable uPNP

Click the checkbox to enable uPNP function.

Refer to 4.22 What is Universal Plug and Play

(uPNP)?

Enable Web Server

Access on WAN

Click the checkbox to enable web configuration from

WAN side.

Enable WAN Echo

Click the checkbox to enable WAN ICMP response.

Set TTL value

Click to Enable and set Time to Live value.

Apply Changes

Click the Apply Changes button to complete the

new configuration setting.

Reset

Click the Reset button to abort change and recover

the previous configuration setting.