X-Micro Tech. XWL-11GRTX 사용자 설명서
30
setup the connection through PPPoE protocol
whenever you send the data packets out through the
WAN interface; there are a watchdog implemented
to close the PPPoE connection while there are no
data sent out longer than the idle time set.
Manual connection type means to setup the
connection through the PPPoE protocol by clicking
the Connect button manually, and clicking the
Disconnect button manually.
Idle Time
If you select the PPPoE and Connect on Demand
connection type, fill in the idle time for
auto-disconnect function. Value can be between 1
and 1000 minutes.
MTU Size
Fill in the mtu size of MTU Size. The default value is
1400. Refer to 4.23 What is Maximum Transmission
Unit (MTU) Size?
Attain DNS
Automatically
Click to select getting DNS address for PPPoE
support. Please select Set DNS Manually if the
PPPoE support is selected.
Set DNS Manually
Click to select getting DNS address for Static IP
support.
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC Address Fill in the MAC address that is the MAC address to
be cloned. Refer to 4.24 What is Clone MAC
Address?
Enable uPNP
Click the checkbox to enable uPNP function.
Refer to 4.22 What is Universal Plug and Play
(uPNP)?
Enable Web Server
Access on WAN
Click the checkbox to enable web configuration from
WAN side.
Enable WAN Echo
Reply
Click the checkbox to enable WAN ICMP response.
Set TTL value
Click to Enable and set Time to Live value.
Apply Changes
Click the Apply Changes button to complete the
new configuration setting.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.