Huawei MC509 Benutzerhandbuch
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
Overall Description
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
23
or to the end of a command. This rule is applicable to the communication
between the MT and TE programs.
between the MT and TE programs.
3. For an uninterruptible AT command, after sending the AT command, the TE
must wait until the MT responds to the AT command before sending the second
AT command.
AT command.
4. A string used by the TE to send a command cannot contain the combination of
quotation marks and commas (confusing a parameter with a string). The current
version does not support escape character. The code value of a data format in
the UCS2 encoding is reported as characters. For example, if the UCS2 code of
a Chinese character is 0x553a, the 553a is reported.
version does not support escape character. The code value of a data format in
the UCS2 encoding is reported as characters. For example, if the UCS2 code of
a Chinese character is 0x553a, the 553a is reported.
A possible response sent by the MT to the TE consists of Information text and
Result code, in which Information text is optional and Result code is mandatory.
The format of a possible response is controlled by the ATV command. For details,
see the description of the ATV Command. In this document, all possible responses
listed in tables follow the ATV1 format.
Result code, in which Information text is optional and Result code is mandatory.
The format of a possible response is controlled by the ATV command. For details,
see the description of the ATV Command. In this document, all possible responses
listed in tables follow the ATV1 format.
1.5 Organization of This Document
This document consists of 15 chapters, covering the following contents:
Chapter
Description
Chapter 1 Overall Description
The contents and organization of this
document and the basic knowledge of
AT command interfaces.
document and the basic knowledge of
AT command interfaces.
Chapter 2 Basic Configuration
Commands
Commands
The AT commands used to configure
the basic data of the module.
the basic data of the module.
Chapter 3 Identity Information Query
Commands
Commands
The AT commands used to query the
identity information.
identity information.
Chapter 4 Security Control Commands
The AT commands used to control the
security of the module.
security of the module.
Chapter 5 Serial Port Control Commands The AT commands used to control the
serial ports of the module.
Chapter 6 Network Service Interface
Commands
Commands
The AT commands related to the
network services of the module.
network services of the module.
Chapter 7 Call Control Commands
The AT commands used to control the
calls on the module.
calls on the module.
Chapter 8 SMS Interface Commands
The AT commands related to the short
messages of the module.
messages of the module.
Chapter 9 Phonebook Interface
Commands
Commands
The AT commands related to the
phonebook interface of the module.
phonebook interface of the module.
Chapter 10 Internet Service Interface
Commands
Commands
The AT commands related to the
internet services of the module.
internet services of the module.