Regency L676-NG1 Benutzerhandbuch

Regency

®

 L676-1 Direct Vent Gas Fireplace

MAINTENANCE

5)   Remove the log set.

9)   Remove the burner tube by removing the 2 

screws.

10)  Remove the rear log stand by removing  
       the 4 screws.

  c.   Place the door on a soft surface to prevent 

scratching.

4)  Remove the glass door.

 

a.  Release the 2 door latches on the left      
     and right side at the top of the fi rebox.

 b.  Swing the door out from the top and release   

the hinge on the left side of the  door and 
lift out.

3)  Remove the front cover plate by lifting up 

off of the pins on the left and right side of 
the fi rebox.

1)  Shut off the gas supply to the unit.

2)  Remove the right side mesh by gathering the 

mesh together and lifting the curved end of 
the rod up and out of the bracket located on 
the top right of the glass frame.

 

Now slide the straight end of the rod out from 
the bracket located on the middle inside top 
of the outer shell. Repeat for left side.

7)   Remove the brick panels.

8)   Remove the grate by undoing the 3 

screws.

6)   Remove the burner orifi ce cover plate from 

the log tray by undoing the 2 screws.