Regency L676-NG1 Benutzerhandbuch

Regency

®

 L676-1 Direct Vent Gas Fireplace

MAINTENANCE

14) Unplug the green (TH) and white (TP/TH) 

wires from the valve.

15) Disconnect the 2 DC Spark generator wires 

from the DC spark box located in front of 
the valve.

16) Disconnect the spark electrode wire from  

the DC spark box.

17) Remove the 16 screws that hold the valve 

tray to the fi rebox and slightly pull out the 
valve tray.

18) Completely pull out the valve tray.

19) Replace the valve tray and reverse steps 

to re-install.

20) Turn on the gas supply and check for gas  

leaks.

21) Re-install the rear log stand.

22) Re-install the burner tube.

23) Re-install the grate.

24) Re-install the brick panels.

25) Re-install the burner ofi rice cover plate. 

26) Re-install the log set.

27) Re-install the glass door.

28) Re-install the front cover plate

29) Re-install the mesh screen.

30) Check the inlet and outlet pressures.

31) Check operation of fl ame control.

32) Check for proper fl ame appearance.

11) Disconnect the inlet gas line from the  

valve.

12) Undo the center wire clip on the side of the 

fi rebox.

13)  Unplug the wire harness that connects the 

modulating coil to the receiver.