Panasonic NV-DS50A Benutzerhandbuch
55
3:
The Remaining Tape Time Indication does
not match the actual remaining tape time.
not match the actual remaining tape time.
3-1: If scenes of less than 15 seconds are
continuously recorded, the remaining tape time
cannot be displayed correctly.
cannot be displayed correctly.
3-2: In some cases, the Remaining Tape Time
Indication may show remaining tape time that is
2 to 3 minutes shorter than the actual
remaining tape time.
2 to 3 minutes shorter than the actual
remaining tape time.
Playback (Images)
1:
1:
Images cannot be played back even when
the [
the [
1] Button is pressed.
1:
Is the [VCR/OFF/CAMERA/M-CARD] Switch
set to [VCR]? If it is set to the other position, the
playback function cannot be used. (
set to [VCR]? If it is set to the other position, the
playback function cannot be used. (
l 30)
2:
2:
This phenomenon is characteristic of digital
video systems. It is not a malfunction.
video systems. It is not a malfunction.
3:
Although the Movie Camera is correctly
connected to a TV, playback images cannot
be seen.
connected to a TV, playback images cannot
be seen.
3:
Have you selected “Video Input” on the TV?
Please read the operating instructions of your
TV and select the channel that matches the
input sockets used for the connection.
Please read the operating instructions of your
TV and select the channel that matches the
input sockets used for the connection.
4:
Playback image is not clear.
4:
Are the heads of the Movie Camera dirty? If the
heads are dirty, playback image cannot be
clear. (
heads are dirty, playback image cannot be
clear. (
l 52)
Playback (Sound)
1:
1:
Sound is not played back from the built-in
speaker of the Movie Camera or the
headphones.
speaker of the Movie Camera or the
headphones.
1:
Is the volume too low? Push the [VOLUME]
Lever to adjust the volume. (
Lever to adjust the volume. (
l 30)
2:
Different sounds are reproduced at the
same time.
same time.
2:
[12bit AUDIO] on the [PLAYBACK
FUNCTIONS] Sub-Menu of the [VCR
FUNCTIONS] Main-Menu has been set to
[MIX]. As a result, the original sound and sound
that was recorded by audio dubbing are played
back together. It is possible to reproduce the
sounds separately. (
FUNCTIONS] Sub-Menu of the [VCR
FUNCTIONS] Main-Menu has been set to
[MIX]. As a result, the original sound and sound
that was recorded by audio dubbing are played
back together. It is possible to reproduce the
sounds separately. (
l 35)
3:
The original sound was erased when audio
dubbing was performed.
dubbing was performed.
3:
If you perform audio dubbing on a recording
done in [16bit] Mode, the original sound will be
erased. If you wish to preserve the original
sound, be sure to select [12bit] Mode at the
time of recording.
done in [16bit] Mode, the original sound will be
erased. If you wish to preserve the original
sound, be sure to select [12bit] Mode at the
time of recording.
4:
Sounds cannot be played back.
4-1: Although a Cassette with no audio dubbing is
being played, is [12bit AUDIO] on the
[PLAYBACK FUNCTIONS] Sub-Menu of the
[VCR FUNCTIONS] Main-Menu set to [ST2]?
To play back a Cassette with no audio dubbing,
[12bit AUDIO] must be set to [ST1]. (
[PLAYBACK FUNCTIONS] Sub-Menu of the
[VCR FUNCTIONS] Main-Menu set to [ST2]?
To play back a Cassette with no audio dubbing,
[12bit AUDIO] must be set to [ST1]. (
l 35)
4-2: Is the Variable Speed Search Function
working? Press the [
1] Button to cancel the
Variable Speed Search Function. (
l 31)
Card (NV-DS50 only)
1:
1:
Card Photoshot Playback images do not
look normal.
look normal.
1:
The picture may be damaged. In order to
prevent the loss of image data, backing up on a
personal computer is recommended.
(
prevent the loss of image data, backing up on a
personal computer is recommended.
(
2:
k
] Indication is
displayed.
2:
The image was either recorded in a different
format, or data is damaged.
format, or data is damaged.
3:
Even if a Card is formatted, it cannot be
used.
used.
3:
Either the Movie Camera or the Card may be
damaged. Please consult a dealer.
damaged. Please consult a dealer.
~~~~~~~~~~~~~~~~~
Explanation of Terms
ª Digital Video System
In a digital video system, images and sounds are
converted into digital signals and recorded on a
tape. This complete digital recording is capable of
recording and playback with minimal image and
sound deterioration.
In addition, it automatically records data, such as
Time Code and Date/Time, as digital signals.
Compatibility with S-VHS or VHS Cassettes
Because this Movie Camera employs a digital
system for recording image and sound data, it is not
compatible with conventional S-VHS or VHS video
equipment that employs an analog recording
system.
The size and shape of the Cassette are also
different.
Compatibility with Output Signals
Because AV signal output from the AV signal output
socket is analog (the same as conventional video
systems), this Movie Camera can be connected with
S-VHS or VHS video or a TV for playback.
converted into digital signals and recorded on a
tape. This complete digital recording is capable of
recording and playback with minimal image and
sound deterioration.
In addition, it automatically records data, such as
Time Code and Date/Time, as digital signals.
Compatibility with S-VHS or VHS Cassettes
Because this Movie Camera employs a digital
system for recording image and sound data, it is not
compatible with conventional S-VHS or VHS video
equipment that employs an analog recording
system.
The size and shape of the Cassette are also
different.
Compatibility with Output Signals
Because AV signal output from the AV signal output
socket is analog (the same as conventional video
systems), this Movie Camera can be connected with
S-VHS or VHS video or a TV for playback.
A-ENG.book 55 ページ ２００２年１月２８日 月曜日 午前１１時３２分