Panasonic AG-3DP1G Benutzerhandbuch
1
Chapter
Connecting
to
Exter
nal
De
vices
De
vices
Connecting the AG-EC4G Extension Control Unit
Some functions can be remote controlled when the AG-
EC4G extension control unit (optional accessory) is
connected to the camera.
When the AG-EC4G is connected, the camera
automatically enters remote control mode after the power
switches of both the camera and the AG-EC4G are turned
ON.
The remote control mode is released when AG-EC4G is
removed or the power for the AG-EC4G is turned OFF.
EC4G extension control unit (optional accessory) is
connected to the camera.
When the AG-EC4G is connected, the camera
automatically enters remote control mode after the power
switches of both the camera and the AG-EC4G are turned
ON.
The remote control mode is released when AG-EC4G is
removed or the power for the AG-EC4G is turned OFF.
Switch/button operations in remote control
mode
The following switches and buttons on the camera do not
work in remote control mode.
• SHUTTER switch
• MENU button
• JOG dial button
• GAIN selector switch
• OUTPUT/AUTO KNEE selector switch
• WHITE BAL switch
• USER MAIN button
• USER 1 button
• USER 2 button
• OUTPUT CHARACTER switch
work in remote control mode.
• SHUTTER switch
• MENU button
• JOG dial button
• GAIN selector switch
• OUTPUT/AUTO KNEE selector switch
• WHITE BAL switch
• USER MAIN button
• USER 1 button
• USER 2 button
• OUTPUT CHARACTER switch
REMOTEconnector
AG-EC4G
NOTE
• Be sure to turn the POWER switches on the camera and
the AG-EC4G off before connecting or disconnecting the
controller cable.
controller cable.
• Use only designated cables or designated option cables to
connect the AG-EC4G. Use of other cables could result in
equipment damage.
equipment damage.
For details on the current provided by the REMOTE connector,
refer to page 138.
refer to page 138.
• Data for the operations performed by the AG-EC4G are
generally stored in the camera.
• Setting the DATA SAVE switch on the AG-EC4G to OFF resets
the following values to the values before connecting the AG-
EC4G.
EC4G.
- Synchro scan value
- Master Pedestal value
- GAIN values (R/B)
- Pedestal values (R/G/B)
- GAIN value (at LOW position)
- Master Pedestal value
- GAIN values (R/B)
- Pedestal values (R/G/B)
- GAIN value (at LOW position)
Adjusting the Convergence Point
The convergence point can be adjusted, using the buttons
on the AG-EC4G.
on the AG-EC4G.
c
b
a
a USER buttons (USER MAIN/USER1)
b RECORDER switch
c
t
REW,
y
FF,
g
STOP and
q
PLAY buttons
1
IntheSWMODEscreen,assignRCONVto
theUSERMAINorUSER1button.
2
PresstheUSERbuttontowhichRCONVhas
beenassignedontheAG-EC4G.
3
SettheRECORDERswitchtoENABLE.
4
Adjusttheconvergence,usingthe
g
STOP
and
q
PLAYbuttonsforcoarseadjustment
andthe
t
REWand
y
FFbuttonsforfine
adjustment.
g
STOP,
t
REW:
to adjust the convergence point
nearer
q
PLAY,
y
FF:
to adjust the convergence point
farther
farther
NOTE
The USER2 button on the AG-EC4G operates as the
THUMBNAIL button for the camera.
THUMBNAIL button for the camera.