Panasonic AG-3DP1G Benutzerhandbuch

13

Chapter

Maintenance

and

Inspections

Chapter 9 

Maintenance and Inspections

Make sure you check that the system is operating normally 
before embarking on a shoot. We recommend using a 
colour video monitor to check the image.

Mountachargedbattery.

TurnthePOWERswitchtoONtocheckthe

batteryremaininglevelontheLCDmonitoror

intheviewfinder.

•  When battery capacity is low, replace it with a fully 

charged battery. 

9 9 9 min

B 9 0 %

D I O N C 1 6 0

S C E N E 6

A G E

R

I M

InsertPcardsintocardslotsLandRand

closetheslotcover.

•  Confirm that both P2 card access LEDs L and R 

light in orange.

•  Recording cannot start if either P2 card has no 

free space for recording or is write-protected.

PcardaccessLEDs

Setthezoomtoelectriczoommodeandcheck

thezoomoperation.

•  Check that the image changes to telephoto and 

wide angle.

Setthezoomtomanualzoommodeandcheck

thezoomoperation.

•  Turn the manual zoom lever to check that the 

image changes to telephoto and wide angle.

Settheiristoautomaticadjustmentmodeand

aimthelensatobjectswithdifferentdegrees

ofbrightness,tocheckthattheautomaticiris

adjustmentoperatesnormally.

Settheiristomanualadjustmentmodeand

turntheirisring,tocheckthemanualiris

adjustment.

Returntheiristoautomaticadjustmentmode

andchangetheGAINswitchsettingtoL,M,

andH,tocheckthefollowingitems:

•  The iris is adjusted for objects with the same 

brightness according to the switch setting.

•  The gain value displayed on the viewfinder screen 

changes according to the switch setting.

PresstheLCD/EVFbuttontosettheLCD/EVF

modetoMIXorSIDEbySIDE.

PresstheSHIFTbuttontodisplaythe3DFINE

adjustmentscreen.

Checktheverticalposition,focus,andlensiris

oftheleft-lensimageandright-lensimage,on

theLCDmonitorandintheviewfinder.

•  If the adjustments are not the same for the left-lens 

image and the right-lens image, readjust them 
using the 3D FINE function.

For details, refer to [Adjustment between Two 
Lenses (3D FINE function)] (page 57).