Panasonic AJ-P Benutzerhandbuch

43

603

V-MUTE SEL

0000
0001
0002
0003

N MUTE

GRAY

BLACK

NOISE

For setting whether to mute the video output signal when a blank part of the tape is
detected during playback.
0: The video output signal is not muted.  (It is frozen.)
1: The video output signal is muted and turned gray.
2: The video output signal is muted and turned black.
3: The video output signal is muted and turned into noise.

600

VIDEO IN SEL

0000
0001
0002

INTSG

HDSDI

1394

For selecting the video signals to be input.
0: The internal signal selected by VIDEO INT SG is generated.
1: The serial video signal supplied to the HD SDI IN connector is selected.
2: The compressed digital signals supplied to the DV connector are selected.

When this happens, the audio input signals will also be supplied from the DV
connector (digital video interface).

O

This item’s setting cannot be changed while a tape is being played back. 

O

When 1394 is selected as this item’s setting, “1080i” is selected as the menu
item No.630 [1080i

>HD_OUT] setting and “720p” is selected as the menu item

No.632 [720p

>HD_OUT] setting.

626

D/C ENH H

0000
0001

0dB

+1dB

For enhancing the horizontal outlines during down-conversion.
0: 0dB
1: +1dB

627

D/C ENH V

0000
0001

0dB

+1dB

For enhancing the vertical outlines during down-conversion.
0: 0dB
1: +1dB

602

SDI IN MODE

0000
0001

DR OFF

DR ON

For selecting how to process the serial input.
0: The 8 higher bits whose two lower bits have been rounded off are recorded.
1: The dynamically rounded 8 higher bit signal is recorded.

604

FREEZE SEL

0000
0001

FIELD

FRAME

For selecting the freeze mode of the still pictures and the slow play mode.
0: Field freeze, field slow
1: Frame freeze, frame slow

615

V OUT SEL

0000
0001

CMPNT

CMPST

For selecting what signals are to be output from the VIDEO OUT1 output
connector.
0: The HD component signals are output.
1: Composite signals are output.

616

OUT MATRIX

0000
0001

YPbPr

RGB

For selecting what signals are to be output from the HD component output
connector.
0: The YP

B

P

R

signals are output.

1: The RGB signals are output.

601

VIDEO INT SG

0000
0001
0002
0003
0004

0005

100%CB

75%CB

SMPTE

BLACK

PLL

EQ

For selecting the type of internal signal.
0: A 100% color bar signal is selected.
1: A 75% color bar signal is selected.
2: An SMPTE color bar signal is selected.
3: A black signal is selected.
4: The PLL signal is selected.  (This signal is used for the adjustments performed

before the unit was shipped from the factory.)

5: The EQ signal is selected.  (This signal is used for the adjustments performed

before the unit was shipped from the factory.)

620

DOWNCON
MODE

0000
0001
0002

FIT_V

FIT_H

FIT_HV

For setting the image processing during down-conversion.
0: Side cut mode
1: Letter-box mode
2: Squeeze mode

621

UPCON V MODE

0000
0001
0002

FIT_V

FIT_H

FIT_HV

For setting the image processing during up-conversion.
0: Side panel mode
1: Top and bottom cut-off in vertical direction
2: Stretch mode