Panasonic AJ-P 사용자 설명서
43
Setup menus
603
V-MUTE SEL
0000
0001
0002
0003
0001
0002
0003
N MUTE
GRAY
BLACK
NOISE
For setting whether to mute the video output signal when a blank part of the tape is
detected during playback.
0: The video output signal is not muted. (It is frozen.)
1: The video output signal is muted and turned gray.
2: The video output signal is muted and turned black.
3: The video output signal is muted and turned into noise.
detected during playback.
0: The video output signal is not muted. (It is frozen.)
1: The video output signal is muted and turned gray.
2: The video output signal is muted and turned black.
3: The video output signal is muted and turned into noise.
600
VIDEO IN SEL
0000
0001
0002
0001
0002
INTSG
HDSDI
1394
For selecting the video signals to be input.
0: The internal signal selected by VIDEO INT SG is generated.
1: The serial video signal supplied to the HD SDI IN connector is selected.
2: The compressed digital signals supplied to the DV connector are selected.
0: The internal signal selected by VIDEO INT SG is generated.
1: The serial video signal supplied to the HD SDI IN connector is selected.
2: The compressed digital signals supplied to the DV connector are selected.
When this happens, the audio input signals will also be supplied from the DV
connector (digital video interface).
connector (digital video interface).
<Notes>
O
This item’s setting cannot be changed while a tape is being played back.
O
When 1394 is selected as this item’s setting, “1080i” is selected as the menu
item No.630 [1080i
item No.630 [1080i
>HD_OUT] setting and “720p” is selected as the menu item
No.632 [720p
>HD_OUT] setting.
626
D/C ENH H
0000
0001
0001
0dB
+1dB
For enhancing the horizontal outlines during down-conversion.
0: 0dB
1: +1dB
0: 0dB
1: +1dB
627
D/C ENH V
0000
0001
0001
0dB
+1dB
For enhancing the vertical outlines during down-conversion.
0: 0dB
1: +1dB
0: 0dB
1: +1dB
602
SDI IN MODE
0000
0001
0001
DR OFF
DR ON
For selecting how to process the serial input.
0: The 8 higher bits whose two lower bits have been rounded off are recorded.
1: The dynamically rounded 8 higher bit signal is recorded.
0: The 8 higher bits whose two lower bits have been rounded off are recorded.
1: The dynamically rounded 8 higher bit signal is recorded.
604
FREEZE SEL
0000
0001
0001
FIELD
FRAME
For selecting the freeze mode of the still pictures and the slow play mode.
0: Field freeze, field slow
1: Frame freeze, frame slow
0: Field freeze, field slow
1: Frame freeze, frame slow
615
V OUT SEL
0000
0001
0001
CMPNT
CMPST
For selecting what signals are to be output from the VIDEO OUT1 output
connector.
0: The HD component signals are output.
1: Composite signals are output.
connector.
0: The HD component signals are output.
1: Composite signals are output.
616
OUT MATRIX
0000
0001
0001
YPbPr
RGB
For selecting what signals are to be output from the HD component output
connector.
0: The YP
connector.
0: The YP
B
P
R
signals are output.
1: The RGB signals are output.
601
VIDEO INT SG
0000
0001
0002
0003
0004
0001
0002
0003
0004
0005
100%CB
75%CB
SMPTE
BLACK
PLL
EQ
For selecting the type of internal signal.
0: A 100% color bar signal is selected.
1: A 75% color bar signal is selected.
2: An SMPTE color bar signal is selected.
3: A black signal is selected.
4: The PLL signal is selected. (This signal is used for the adjustments performed
0: A 100% color bar signal is selected.
1: A 75% color bar signal is selected.
2: An SMPTE color bar signal is selected.
3: A black signal is selected.
4: The PLL signal is selected. (This signal is used for the adjustments performed
before the unit was shipped from the factory.)
5: The EQ signal is selected. (This signal is used for the adjustments performed
before the unit was shipped from the factory.)
620
DOWNCON
MODE
MODE
0000
0001
0002
0001
0002
FIT_V
FIT_H
FIT_HV
For setting the image processing during down-conversion.
0: Side cut mode
1: Letter-box mode
2: Squeeze mode
0: Side cut mode
1: Letter-box mode
2: Squeeze mode
621
UPCON V MODE
0000
0001
0002
0001
0002
FIT_V
FIT_H
FIT_HV
For setting the image processing during up-conversion.
0: Side panel mode
1: Top and bottom cut-off in vertical direction
2: Stretch mode
0: Side panel mode
1: Top and bottom cut-off in vertical direction
2: Stretch mode
VIDEO
Item
Setting
No.
Superimposed
display
No.
Superimposed
display
Description of settings
“
” indicates the factory setting.