Sterling 882.000254.00 Benutzerhandbuch

7/50D Plus or 7/50D Controller

Chapter 3: Installation

Connecting Filter Chambers

Make sure that all previous installation steps have been done first before starting this task.
You’ll use one yellow patch cord to connect.

To connect a filter chamber to the network:

1. Attach one connector of the yellow patch cord to the terminal on the filter chamber

terminal box. Tighten the cord grip ring until snug.

Figure 15: Proper Filter Chamber Connections

VFC Filter Chamber

Grey Network Flat Cable

Black Power Flat Cable

Vacuum Tube

ArmorBlock Mounting Plate Kit

Part No. A0556696

8 Input / 8 Output ArmorBlock

Part No. A0555192

ArmorBlock Base

Part No. A0555191

Yellow Patch Cord, 20 ft. (6 m)

Part No. A0555190

2. Attach the other connector to the lower right terminal of the ArmorBlock you used

to connect the vacuum pump. Tighten the cord grip ring until snug.

Note: Retain the terminal caps from the ArmorBlock. They may be used

later.

3. Dress the excess patch cord cables with cable ties so they do not interfere with

operation and to give a pleasing appearance.