Dynex DX-LCD32-09 Benutzerhandbuch

Seite von 76
20
Specifications
General
Specifications
Product design and specifications are subject to change without notice.
Legal notices
FCC Part 15 
This equipment has been tested and found to comply within the limits 
for a class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party 
responsible for compliance with the FCC Rules could void the user’s 
authority to operate this equipment.
FCC warning
This is a CLASS B product. In a domestic environment this product may 
cause radio interference in which case the user may be required to take 
adequate measures to counter interference.
Notices
Specifications and features are subject to change without notice or 
obligation.
For service and support call (800) 305-2204.
Problem
Solution
One or more channels 
cannot be displayed.
• Make sure that your TV has 
memorized channels.
• Make sure that the channel has 
not been deleted from the 
memorized channel list. If the 
channel was deleted, you can 
press the number buttons on the 
remote control to tune to the 
channel.
• Make sure that the channel is not 
blocked through the parental 
controls.
Password lost.
• If you have forgotten the 
password, enter 1397 to open the 
Lock menu and set a new 
password.
Some menu options cannot 
be accessed.
• If an option is grayed, the option 
is not available for the current 
video input mode.
TV cabinet creaks or makes 
noises.
• This is not a malfunction. When 
you use your TV, the temperature 
inside the cabinet increases. This 
causes the cabinet to expand or 
contract, which makes a creaking 
noise.
Control buttons on the TV 
do not work.
• Unplug the power cord, wait a 
few seconds, plug the cord back 
in again, then turn on your TV.
Type
LCD TV
Panel
32" TFT LCD
TV system
NTSC-M, ATSC
Receiving channels
VHF: 2-13
UHF: 14-69
CATV: 1-125
CADTV: 1-135
DTV: 2-69
Audio multiplex
BTSC system
Audio out
6 W  ×  2
Power requirement
AC 120 V, 60 Hz
Power consumption
150 W
Dimensions
(W × H × D)
31.9 × 23 × 10 inches
(81.1 × 58.3 × 25.5 cm)
Weight
30.9 lbs (14 kg)
Temperature
Storage: 32° to 122°F (0° to 50°C)
Working: 41° to 104°F (5° to 40°C)
Input ports
Composite video/audio (L/R) (1)
S-Video (1)
Component video/audio (L/R) (2)
HDMI (2)
VGA/audio (1)
Antenna (1)
Output ports
Composite video/audio (L/R) (1)
Headphone (1)
S/PDIF (optical) (1)
Control port
RS-232