GE 25425 Benutzerhandbuch

If the power cord is not plugged into the unit, and the battery is available, the unit enters 

Battery Operation Mode. In this mode, the unit fully supports all operational features, 

except the intercom call function and cordless handset. 

If the power cord is not plugged into the unit and no battery is installed, the unit enters 

into No Power Operation mode. in this mode, the user may:
1)   use the handset to manually make a call on line 1 only,
2)   answer a call on line 1 with the handset. 

It is possible to enhance your phone to a cordless feature with the additional purchase of 

the H5401 accessory handset and module. The H5401 is packaged with an RF module, when 

the module is properly inserted into the back of the 25425 base, the antenna icon on the 

display will illuminate. 

No dial tone
•  Check or repeat installation steps:
•  Make sure the telephone line cords are connected to the phone and the wall jack. Make 

sure the line cords are not damaged.

•  Make sure the hook switch pops up when the handset is lifted.
•  Check the SPEAKER button. Make sure the indicator is off.
•  Disconnect the phone from the wall jack and connect another phone to the same jack. 

If there is no dial tone in the second phone, the problem might be your wiring or local 

service.

You cannot be heard by the other party.
•  Make sure the handset or headset cord is inserted properly and securely.
•  Make sure the MUTE feature is not turned on.